-10%

2.4G SP09X Micro DSM2 DSMX Satellite Receiver for RC MINI FPV Drone Quadcopter Brushless Racer

9,20 8,28

Comparer
SKU: 32809389587 Category:

Description

2.4G SP09X Micro DSM2/DSMX Satellite Receiver for RC airplanes

Specification:

-Item Name: 2.4G SP09X micro DSM2/DSMX Satellite receiver
-Frequency range: 2.403-2.479Ghz
-Input power: 5V
-Response time: 22ms / 11ms
-Resolution: 1024/2048
-Display method: LED
-Operating voltage: 3.3V
-Working current: 60MA
-Size: 18mm*13mm*5mm
-Weight: 0.9 g
-Antenna length: 30mm
-Data format: Serial port
-Protocol: DSM2/DSMX
-Distance: no ground interference (1 m from the ground ) > 200m
-Uses: Micro indoor/outdoor small aircraft./multi rotor
-Compatible Transmitters: DSM2 / DSMX series of remote control
Pin-out Diagram:

Bind procedure With F3 flight controller:
-Connect Flight controller to computer and open Cleanflight configurator From CLI tab type: “set spektrum_sat_bind = 9” for DSMX or “set spektrum_sat_bind = 5” for DSM2
-Type “save” and after Flight controller reboot remove USB cable (=Power off the board)
-Wait a second and reconnect the USB cable. After cold start satellite led(Orange color LED) should start blinking and transmitter should be turned on while pressing the bind button
-After binding satellite led should be solid. Connect Betaflight and use receiver tab to test that satellite is working correctly.
-Final step is to go to CLI tab and type “set spektrum_sat_bind = 0” and then type “save”. This must be done so that satellite doesn’t go back to binding mode when the Flight controller is repowered again.

Additional information

Plastic Type

ABS

Material

Plastic

RC Parts & Accs

Other

Upgrade Parts/Accessories

Other

SKU

F20579

Four-wheel Drive Attributes

Assemblage

For Vehicle Type

Airplanes

Remote Control Peripherals/Devices

Receivers

Tool Supplies

Putty Category

Model Number

SP09X

Brand Name

feichao

Use

Vehicles & Remote Control Toys