Anysane RF 433MHZ 2CH emitter 3000m long distance remote control AC85-250 V 30A relay switch receiver Momentary Toggle Latching
- Brand: Anysane
- Relay working voltage: AC 85-250 V
- Frequency: 433MHz/315MHz (Optionial)
- Relay receive range: Approx 100 m
- Working mode: signal self-lock/inter-lock/non-self-lock
- Max,load: 3000 W
- Relay max current: 30A
- IC board size: Approx 70*50*18 m
- This is a receiver, it must use together with remote, we have some remotes to match this receiver, please contact us if you need. ( )
- If your remotes are not from our store, we can not 100% ensure this receiver can work with your remote ,so we will not bear the responsibility.
- We keep updating all the time, some appearence differences are acceptable (The appearence will not change much)
- Please note us which frequency you need (433.92/433MHz , or 315 MHz ).Otherwise, we will send by random.
- AC 85-220V 30A mini size RF relay which can convey 3000 Welectric appliances.
- Relay: learning code EV1527, can learn multiple remote control
- 3 working mode: self-lock, inter-lock and non-lock
- 2 output mode: electronic output and switch signal output
- You can use different remote(need ensure EV1527) to control multiple switches, also you can mulitple remote control special switch, easy to use and can be very flexible
- It is mainly used in light, electronic door, curtain, lifting equipment , gateways lifts industrial control and security industry and others area.
How to use:
- +: connect AC85-250V positive power supply;
- -: connect AC85-250V power supply negative;
- NO: output terminals; normally open relay;
- COM: an output terminal; relay common
- NC: output; normally closed terminal of relay
Learn the code:
Pressing the learn key 3 sec (in IC board), then press a button you want to match , the pilot light on after fashing, it means it had completed the learning.
Note: this remote can learn the fixed code (PT 2262. SC2260 chips)/ learnning code (EV 1527,HS2240…) up to remenber 20 kinds different codes .If over 20 kinds, it will clear the eariest code.
Clear the code:
Pressing the learning key about 8 sec, the pilot light reset to light on from light off, clearing code completed .